Joypad Controller for Switch, Black color, RGB Lights

Product Function Instructions This product has a Bluetooth connection and is compatible with the Nintendo Switch console. It supports one-click remote wake-up of the Switch console for instant play. The controller has an automatic sleep function for energy and power saving. It includes a built-in 6-axis gyroscope chip with motion-sensing interaction technology. The controller features a screenshot function to capture gameplay images. It has a built-in rechargeable battery that is charged using a Type-C cable. It also includes RGB lighting with seven color gradient effects. The reset key can be pressed inside the reset hole to turn off the controller and disconnect it from the console. The turbo keys support continuous key presses. To remove the controllers from the Switch console, hold down the unlocking keys on the back of the left and right controllers simultaneously. Product Introduction This product is compatible with the Nintendo Switch console and supports wireless connection. The controller can be used either as one combined controller or as two independent controllers. The one-click connection method is simple and easy to use. It provides a strong and stable wireless connection with anti-interference capability. The controller has a built-in gyroscope that supports motion-sensing functions. Each of the left and right controllers includes a built-in motor to support vibration. The product supports waking up both the Switch console and the controller. If the controller is connected and no action is taken for five minutes, it will enter power-saving mode. The controller lights will turn off, and it will automatically enter hibernation when disconnected. The controller can also be upgraded by connecting it to a computer via USB and using update software. Product Description The controller uses Bluetooth 4.0 and is compatible with the Nintendo Switch. It supports one-click remote wake-up and connect-and-play functionality, along with automatic sleep and energy-saving features. It has a built-in 6-axis gyroscope chip with motion-sensing interaction technology for fine-tuning, accurate aiming, and fast target locking. The screenshot function allows you to capture the game screen. Four signal channel indicators accurately display the connection and power status of the controller. The left and right joysticks can rotate 360 degrees for precise control, helping players achieve accurate aiming and other detailed operations. The key layout is lightweight and durable, with a lifespan of millions of presses. The controller contains a high-capacity lithium polymer battery with short-circuit and over-voltage protection, low power consumption, and high endurance. The ergonomic design, comfortable grip, and lightweight structure make it comfortable for long-term use. Product Characteristic Parameters The product size is 102.6 mm × 44.0 mm × 28 mm. The input voltage and current are DC 5V / 150 mA. The normal working voltage and current are DC 3.7V / 20 mA. The charging time is approximately 2 hours. It uses Bluetooth 4.0 with a transmission distance of up to 8 meters. The battery capacity is 280 mAh. The standby time is up to 25 days on a full charge. The Type-C data cable length is 800 mm. The usage time is approximately 4 hours. Connection Guide To connect the controller to the console for the first time, turn on the Switch console. First, connect the left and right controllers to the console using a cable. After the connection is successful, unplug the controllers, and they will automatically reconnect. To use both controllers as one integrated controller, press and hold the screenshot key on the left controller for two seconds to turn it on. The four LED lights will flash quickly to enter searching mode. When one or more LEDs remain lit, the controller is successfully paired. On the right controller, press and hold the HOME key for two seconds to turn it on. The four LEDs will flash quickly. When one or more LEDs stay lit, pairing is successful. After both controllers are paired, press the L1 and R1 keys simultaneously. The corresponding LEDs will remain lit, indicating that the integrated controller mode is active. Press the B key to return to the main console page. To use the left controller independently, press and hold the screenshot key for two seconds until the LEDs flash. Once paired, press the SL and SR keys simultaneously on the side of the controller until the LED stays lit. The left controller will then function independently. To use the right controller independently, press and hold the HOME key for two seconds until the LEDs flash. After pairing, press the SL and SR keys simultaneously on the side of the controller until the LED remains lit. The right controller will then function independently. To reconnect the controller when the console is in sleep mode, briefly press the HOME key or the screenshot key. Note that this product does not have NFC or camera functionality. The built-in motor is not HD vibration, and vibration performance may vary in certain games. RGB Light Functions The default lighting effect is flowing colorful mode. The seven-color gradient cycles through purple, blue, cyan, green, yellow, orange, and red. Single-color breathing mode cycles through white, red, orange, yellow, green, cyan, blue, and purple. Single-color steady-on mode also cycles through these colors. To adjust lighting modes, double-click the minus or plus button to enter adjustment mode. Use the joystick to switch between major lighting effects by moving it up and down. Press the minus or plus button briefly to exit. You can also switch minor lighting effects by moving the joystick left and right. The lighting effects can also be turned off. Charging, Sleep, Wake-Up, and Shutdown Functions When charging while powered off, LED1 to LED4 blink slowly. When fully charged, the LEDs turn off. If the battery voltage is low, the current channel indicator blinks quickly. The controller will automatically enter sleep mode if no key is pressed within five minutes, including no motion detected by the sensor. In Bluetooth mode, holding the HOME button for five seconds will disconnect the controller and put it into sleep mode. If the battery voltage drops below 3.35V ± 0.1V, the channel indicator will blink quickly to indicate low voltage. If the voltage drops below 3.25V ± 0.1V, the controller will automatically enter sleep mode. When in sleep mode, pressing any key will wake the controller. Pressing the HOME key will also wake the console.