EFEMF-12mm 3-Pin Connectors for RGB Smart IC COB LED Strip Lights,Solderless Terminal Connection Kit,Dual-End Extension,Strip to Male Plug,Gapless,Strip to Wire Connectors,24V 12V 5V LED Light Strips

CompatibleThis mounting kit is only suitable for PAUTIX 12mm 3-pin RGB Smart IC COB LED strip lights (not compatible with 3mm/5mm/8mm/10mm and other COB LED strip lights). Not compatible with strip lights such as 2-pin/4-pin/5-pin/6-pin. Note Not applicable to PAUTIX 4-pin RGB COB LEDQuick ConnectionYou can easily and quickly connect your PAUTIX RGB Smart IC COB LED strip lights using these connectors. No need to solder means you no longer have to worry about soldering problems, perfectly avoiding problems when soldering! Easy to install, this connector kit makes DIY safe and easy, saving you time and money.Stable ConnectionStable connection, durable. Important Note The white wire on the connector corresponds to the negative (GND) wire on the strip, and the red wire corresponds to the positive (+DC24V) wire on the strip. Yellow corresponds to the signal line (DO/DI/DAT) on the light strip. The yellow signal wire does not need to be wired to power when you inject voltage into the strip. If installed incorrectly, the strip will not light properly or will only display white!5 Types of ConnectorsContains 4pcs transparent gapless connectors, 4pcs transparent strip to wire connectors, 3pcs strip to wire extension connectors (with 3 Pin 20cm 20AWG Wires), 3pcs dual-end extension connectors (with 3 pin 20cm 20AWG wire), 3pcs strip to male plug connectors. Various types of 12mm 3-pin RGBIC COB connectors meet your various connection needs!Installation and after-sales servicePAUTIX provides fast customer service response! Please feel free to contact PAUTIX if you need any help on installation. Note that you have to press the copper tabs above the connector to be level with the surface of the connector when you install the connectors, otherwise the strip light will flicker or just show white color.