Chrome Iroquois Motorcycle Micro LED Turn Signals Suzuki Honda Kawasaki Yamaha

1 Pair - Iroquois Universal Chrome Mini Cube LED Turn Signals
Amber LED's - Clear Lens

Tired of looking at your old, over-sized OEM Turn Signal side markers? Do you need to replace a broken Blinker? This is your opportunity to upgrade to our Universal Mini-Stalk style LED Turn Signals. Our Marker Lights offer a compact size that features 6 high power LED's in each housing. The lights have a Plastic Housing with a low profile mini-stalk design. Their small size means you will worry a little less about someone (especially your kids) smacking into and breaking off your turn signal, a problem with many larger Stalk Lights. Our Turn Signal Marker Lights offer a universal fit, this means you can install them on the front or rear of your Motorcycle, ATV, UTV, or Scooter with very little or no modification required.
Stats:
Dimensions: Multiple, please see photo(s)
Housing: Chrome Plastic, Clear Lens, 6 Amber LEDs
Stalk: Steel Mounting Stud and Nut
Wiring: Two Wire, 12 Volt Systems
Fitment Information: This is a Universal Turn Signal Light; therefore, it has unlimited uses and mounting possibilities. This includes, but is not limited to: Sportbikes, Cruisers, Scooters, ATV, Quad, UTV, MX, Dirt Bike, Enduro, Dual Sport, Golf Carts, and even Snowmobiles.

NOTE 1: This is an LED Turn Signal and can increase the Flash Rate of your turn signals. Flash Controllers (Resistors or LED Relays) are not required, but are recommended if you want to correct the hyper flashing.

NOTE 2
: These Turn Signals are pictured installed with our Turn Signal Adaptors; the Adapters are an optional purchase and are not included.

Install Notes: Always test the lights before installation to ensure they work properly. After testing, we recommend disconnecting the battery before starting signal installation. The installation difficulty will vary depending on your application; depending on where you decide to mount them, it may require modification to the fairing. Once you pick a mounting location it's time to locate the existing Turn Signal Wires on your bike, you should have either a 3 or 2 wire system. If you have a 3 wire system, the wire for the running lights are not used in this installation. The other two wires on your bike will be the Turn Signal Power (Positive Wire) and a Ground (Negative Wire). Attach the Yellow Turn Signal Wire to the Bikes Positive Signal Wire and the Black Turn Signal Wire to the Bikes Negative Signal Wire. Test the light and ensure it functions properly prior to putting everything back together. If it's good, repeat the process for the other side. Reassemble, Ride and Enjoy! Do not over-torque mounting nut when installing, it should be hand tight and not forcefully clamped down, we recommend using Thread Locker on all bolts used in a motorcycle application (Blue/Medium).