Specifications

• Vehicle Bolt Pattern: 5x4.5 or 5x4.75 (dual Drilled)
• Wheel Bolt Pattern: 5x4.5 or 5x4.75 (dual Drilled)
• Hub Bore: 87.1mm
• Flat Spacers
• Thickness: Each Spacer Measures 1/4" (6mm) Thick

Vehicle Fitments

THESE SPACERS WILL SLIP OVER THE HUB ON THE FOLLOWING VEHICLES (WILL REQUIRE LONGER STUDS FOR OPTIMAL PERFORMANCE)

• 2004-2009 Cadillac XLR/li>
• 1982-2017 Chevy Camaro/li>
• 1988-2017 Chevy Corvette/li>
• 1982-2004 Chevy S10 / S10 Blazer (Does not work with 2WD Front Hubs)/li>
• 1982-1991 GMC S15 / S15 Jimmy (Does not work with 2WD Front Hubs)/li>
• 1991-2004 GMC Sonoma/li>
• 1982-2002 Pontiac Firebird

Installation Information

• REQUIRED that you Check your vehicle compatibility in Product Description BEFORE buying
• Installation should only be performed by a trained professional
• Will NOT WORK with stock length studs. Extended Wheel Studs are ABSOLUTELY NEEDED for proper installation
• Make sure to get 6-8 FULL TURNS of the lug nuts when tightening
• Be sure to torque the lug nuts to manufacturer specifications
• Check and re-torque all lug nuts after 25-50 miles of driving
• Failure to follow proper procedures may cause your lug nuts to come undone while driving
• Perfect for fixing clearance issues if your wheel(s) is hitting your shocks or brake calipers

Additional Information

• This listing is for Spacers Only!
• It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle
• Buyers may need to purchase extended wheel studs. Buyers are responsible for confirming their wheel studs are the proper length
• Bolt Pattern: 5x4.5 or 5x4.75. Hub Bore: 87.1mm. Spacer Thickness: 12mm (1/2 inch)
• No returns or exchange once installed
• ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS