(2 pack) STAR BRITE Ultimate Aluminum Cleaner & Restorer - For Pontoon Boats, Jon Boats & Canoes - 64 OZ

Reignite the lost shine of your beloved watercraft with STAR BRITE Ultimate Aluminum Cleaner & Restorer, an excellent aluminum cleaner for boats and pontoons. Witness the transformation as this aluminum cleaner & brightener & restorer works to eliminate dullness and stains on unpainted aluminum surfaces, leaving them shining like new. Use it on your pontoon boats, jon boats, and canoes for a spotless look. Ideal for bringing back life to older boats when paired with Ultimate Aluminum Polish as Step 2. As a leading aluminum brightener, STAR BRITE Aluminum Cleaner brings back the beauty of your watercraft. This aluminum cleaner, delivers a matchless performance when it comes to cleaning and restoring. Choose STAR BRITE for the ultimate cleaner of aluminum, giving your boat or any unpainted aluminum a fresh lease of life. DIRECTIONS: Because aluminum oxidizes unevenly, heavily crusted areas are more resistant to cleaning than lighter areas, so follow these steps for best results. Failure to follow instruction will result in an uneven, streaked, or patchy finish. Star brite Aluminum Cleaner & Restorer must ALWAYS be applied evenly using a scrubber pad. ALWAYS thoroughly rinsed before drying. ALWAYS followed with Star brite Aluminum Polish to seal and protect renewed finish. ITEMS NEEDED Before you begin, you will need acid resistant gloves, eye protection, Star brite Ultimate Aluminum Cleaner & Restorer, a Star brite medium scrubber pad (the red one), Star brite Ultimate Aluminum Polish, several clean polishing cloths, and a hose with fresh water for rinsing. Step 1: To avoid creating drip marks, start at the bottom of the area to be cleaned and work upward, in small sections at a time. Generously apply Star brite Ultimate Aluminum Cleaner & Restorer to the surface in smooth, even strokes using the fine mist setting on the sprayer nozzle. The cleaner will foam when it contacts oxidation which indicates it is working. Step 2: Use a Star brite medium red scrub pad to spread the cleaner to ensure uniform coverage. Then scrub evenly with steady pressure to allow the cleaner to penetrate into the heavier oxidized areas. Step 3: Rinse the cleaned surface thoroughly with fresh water. Be sure to rinse the surfaces below as well. DO NOT allow cleaner to dry on any surface. Repeat these steps as needed until clean. Heavy oxidation may require several applications and scrubbing to completely remove. Note that the cleaned surface may still appear uneven until it is polished. Next, restore the luster and shine with Star brite Aluminum Polish - Sold separately. Allow the cleaned surface to dry. Star brite Aluminum Polish will neutralize any remaining acids and seal the aluminum with a protective coating and a more uniform shine. WATCH INSTRUCTIONAL VIDEO!