Fuel Engine Wiring Harness for Ford Super Duty 2003-07 F350 F250 F450 F550 6.0L

Fuel Injector Module Wiring Harness For 2003-2007 Ford F-250/350/450/550 6.0L



Specification:

Condition: 100% Brand New

Type: Wiring Harness

Color: Black

Installation method: Plug



Replaces Part Number:

For 5C3Z-9D930-A, 5C3Z9D930A, 9D930



Feature:

1) New product with premium quality

2) According to the original factory specifications.

3) Perfect match for the original car.

4) Easy installation.

5) Stable performance, high reliability.



Fits:

For 2003-2007 Ford F250 6.0L

For 2003-2007 Ford F350 6.0L

For 2003-2007 Ford F450 6.0L

For 2003-2007 Ford F550 6.0L

For 2004-2005 Ford Excursion 6.0L



Package Include:

1X Fuel Injector Wiring Harness



Note of Repair:

The wiring harness holds the wires of the fuel injector. Though wiring harnesses are high-quality components that take a long time to wear out, they'll get damaged eventually. When that happens, you have to be ready to replace the wiring harness of your vehicle right away. If you're driving a vehicle that's equipped with a injector, here are the things that you can do to replace the damaged wiring harness.



Related Repair Advice:

1. Park your vehicle, and turn off its engine.

2. Open the hood, and locate the fuse box in the passenger's area.

3. In order to relieve the pressure in the fuel system, carefully remove the fuel pump fuse.

4. Carefully disconnect the negative cable from the battery.

5. Find your vehicle's fuel injectors. Usually, these components can be found in a spot where the engine block is connected to the fuel line. Depending on the engine size, your vehicle might have several fuel injectors.

6. Find the old wiring harness. Check for rust, cracks and dirt. If the wiring harness isn't able to hold all the wires properly, then replace it with a new one.

7. Push the center of wiring harness to release it from the fuel injector. Make sure that you slide the old wiring harness down the fuel line.

8. Depress the clip that slides over the old wiring harness so you can release it from the fuel line.

9. Put the new wiring harness in place by sliding it onto the fuel line just beneath the clip. You should be able to hear a clicking sound once the new wiring harness is secured.

10. Make sure that the fuel line and the wiring harness is aligned with the corresponding fuel injector.

11. Secure the new wiring harness by pressing the clip that will hold it on the fuel injector.

12. Reinstall the fuel pump fuse box and reconnect the negative cable to the battery.



Note:

--Please BE AWARE that the vehicle compatibility list on Walmart may not be 100% accurate. Please Comfirm The Parts Number And Confirm This Item Fits Yours Before Purchasing.

--Above listed items are a main reference, for detailed model, please use the year/make/model check finder and check the replace part numbers to confirm the compatibility before purchasing.

--If you have any issues with our product, please contact us immediately and we will do our best to resolve your issue.