Applicable to LED Headlight Kit (High and Low Beam) for Kia

With innovation as our pen and professionalism as our ink, we have spent 20 years delving into the field of automotive parts and accessories, creating more than 20 benchmark projects and serving over 500,000 customers. From technological advancements to service improvements, every step we take positions us at the forefront of the industry. Choosing us means choosing the highest quality products in the sector!

---------- FEATURES ---------- 1. Integrated circuit (current regulator): prevents the LED from being damaged due to voltage fluctuations and spikes. Consumes 80% less energy.

2. The 13,000 RPM TurboCool fan blows cool air directly through an aerodynamic vent to evenly cool every component.

The refined heat sink optimizes LED heat dissipation. 3. IP68 Waterproof: Automatic glue pouring machine. Ensures a 100% waterproof concealed ballast.

This automatic glue pouring machine can help glue each ballast much better than by hand. 4.

We have various testing machines to design accurate and precise parameters for our products, such as output ignition voltage testing, EMC testing, power testing, impulse current testing, etc. 5. Simple installation: Installation takes only 10 minutes. No relay. No capacitor. No additional wiring.

Plug and play.

-------- QUANTITY INCLUDED --------- - 2

High beams - 2 lights

faint --------------- PARAMETER

--------------- 1. Power

: 72 W per pair, 36 W per 2.

High luminous efficiency flux: 8000 lm/pair, 4000 lm/per 3.

Color temperature: 6000 K, cool white 4. Voltage: DC 9-36 V.

(Wide voltage range, constant current control, anti-interference circuit design) 5. Condition: 100% new

6. Quantity: 2 pairs of LED lights (4 units)

7.

Chip type: COB 8.

Water resistant: IP68 9.

Operating temperature: -45°C - +150°C 10. Beam angle: 360°

11.

Safety level: Complies with DOT, CE and RoHS

----------- SUITABLE FOR ------------ For

Kia Amanti 2004-2006 For Kia Amanti

2007-2009 For Kia

Forte 2014-2016 For Kia Forte

2017 2018 For Kia Forte

2019 2020 For Kia Forte

5 2017-2018 For Kia

Magentis 2001-2002 For Kia Optima 2001-2002 For Kia Optima

2011-2013 For Kia Optima

2014-2016 For Kia

2019 Optima for Kia

Rio 2012-2018 for Kia

Rondo 2014-2017 for Kia Sedona 2002-2005 for Kia Sedona 2006-2007 for Kia Sedona 2014-2018 for Kia Sedona 2019-2021 for Kia Seltos 2021-2022

for Kia Sorento 2003-2006

for Kia Sorento 2011-2013

for Kia Sorento 2014-2015

for Kia Sorento 2016-2018

for Kia Sorento 2019-2020

For Kia Soul 2012-2013

for Kia Soul 2014-2019

For Kia Spectra 2003-2004

For Kia Sportage 2011-2016

For Kia Sportage 2017-2020

----------------- ATTENTION ------------------

1. For safety reasons, ensure the vehicle has sufficient cooling time before beginning the installation process.

2. Park the vehicle or make sure it is running smoothly.

3. Make sure to turn off the ignition switch and remove the key.

4. Take care to avoid burns, especially when turning the light on or off.

5. Be careful not to crush or cut the bulb. Also, be sure not to touch the bulb with your fingers, otherwise it will dry out.

6. Carefully check the pins, ports, and cable connections, as incorrect connections can cause problems with the

rays. When adjusting the bulb, make sure the end of the bulb does not touch the inner headlight cover.

How to determine the correct vehicle lamp model:

1. Check the bulb you removed from the car; you will see a specific model on the bottom of the bulb.

2. Consult the owner's manual or the vehicle's maintenance manual, or check the bulb yourself, as you will find specific information there. Check the wear and maintenance parts lists for most vehicles.

3. Go to physical stores, such as auto repair shops, etc., and ask a professional to consult, install, and test it for you.

4. If you're unsure, you can provide us with more car makes and models, year or older, and we'll help you and give you more suggestions and advice. Thank you.