Internal Copper Pipe Bending Spring For AirCondition Steel Manual Pipeline Spring Tube Bending Tool 4 Points 16 20 25 32mm

Features:

1. Insert the spring pipe bender into the PVC pipe, and then you can bend it to the angle you want. Insert the spring pipe bender into the place where the 

PVC pipe needs to be bent, turn the pipe to the required angle, and then for take out the spring pipe bender.

2. It can be used with a hot air blower, suitable for home decoration PVC pipe bending, household water and electricity pipeline processing.3. Select a pipe bender of appropriate size and insert it into the PVC pipe, bend the pipe bender to the required angle, wait for a few minutes,

 and pull out the pipe bender after the pipe does not rebound. The bending angle is controlled above 90 degrees.

4.420mm length 3/4/6 points/1 inch PVC pipe bender wire pipe bending manual tool curve spring.

Specifications:

Product name: PVC wire tube spring bender

Material: square steel

Size: 16mm, 20mm, 25mm, 32mm(optional)

Heavy duty 3 points/16mm [0.42m] bending spring diameter 12.4MM

Heavy duty 4 points/20mm [0.43m] bending spring diameter 16.4MM

Heavy duty 6 points/25mm [0.46m] bending spring diameter 20.4MM

Heavy duty 1 inch/32mm [0.47m] bending spring diameter 26.4MM

Color: tan (as shown in the figure)

Package contents:

1*PVC wire tube spring bender (16mm, 20mm, 25mm, 32mm) optional

Notes:

1. Transition: 1cm=10mm=0.39 inches. The spring bender should not be less than of the inner diameter of the PVC to avoid entanglement and unusable.

2. Choosing a bender with the right pipe size will make the work smoother. Wear protective gloves to your hands. This bender is suitable 

for bending angles of 90 degrees or more. Transition: 1cm=10mm=0.39 inch.

3. The actual color of the product may be slightly different from the picture shown on the website, which is caused by many factors such as monitor brightness and light brightness.

4. The data may have slight manual measurement deviation.