Specification
Material: ABS, POM, PC
Model: FHSM-398
Color: Black
Plug: US Standard
Is Electric: Yes
Input: 110V, 50/60Hz
Output: DC6V, 1000mA
Interface: DC6V
Light Source: LED(0.06W, 3V, Included)
Feet Switch Cord Length: 1.5m/ 4.92ft
Adapter Cord Length: 1.8m/5.9ft
Adaptable Needles: # 9, # 10, # 11, # 12, # 14, 16#
Speed Control: Two Speed
Needle Speed(Fast Speed): 330+30/min
Needle Speed(Slow Speed): 290+30/min
Net Weight: 1.26kg/2.8 lbs
Gross Weight: 1.5kg/3.3 lbs
Product Size: 26.5*13*22.5cm/10.43*5.11*8.85in
Package Size: 30*17*26.5cm/11.8*6.7*10.43in
Package Included
1*Sewing Machine
1*Needle
2* Bobbins
2*Empty Bobbins
1*Needle Threader
1* Adapter
1*Foot Switch
1*English Manual
Notes
Please keep your hands dry and avoid liquids such as water, oil, and sweat from coming into contact with the circuit board of the sewing machine.
Please do not make sudden pulling or forced stopping during sewing to avoid damaging the machine.
When this product arrives, it has already been threaded and comes with a small piece of cloth. This is because the machine has been tested in the factory before packaging.
After sewing, please turn off the power supply timely, then clean and maintain it with a towel.
When sewing thin fabric, straight stitching should be chosen. If Z-shaped or curved stitching is used, it will increase the probability of poor stitching (skipping). When sewing thin, soft, and elastic fabrics, it is necessary to place an A4 printing paper underneath or purchase a special machine needle separately.
When using different fabric materials, please purchase different needle models. #9, # 10 machine needle is suitable for light and thin fabrics such as silk and chiffon. #11 machine needles are suitable for thin fabrics such as shirts, cotton, and knitted fabrics. #12 machine needles are suitable for medium fabrics such as shirts and polyester fabrics. #14Needle is suitable for medium thick fabrics such as ordinary polyester cotton cloth, linen cloth, corduroy, ordinary Denim, etc.
Please read the manual carefully and pay attention to the precautions before use.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
