TRQ Steering Suspension Kit Control Arms Tie Rods Sway Bar End Links 15 pc New PSA63399 Fits select: 1993-2000 CHEVROLET GMT-400, 1995-2000 CHEVROLET TAHOE

This suspension and steering kit was perfect. I bought this kit because it had the upper ball joint already installed to the upper control arm for maybe $75 more. This made things much easier to install. However, The new ball joint was riveted in and not bolted so repair in the future will be more of a pain ( if I only need a ball joint). But I left it at 5 stars because that technically is how OEM came and not a downgrade, it just would have been nice to future proof it on this part. The bottom ball joint is a pain to replace by itself and I traded lower cost over the extra couple hundred dollars of buying a complete lower arm assembly with and ball joint pre-installed. Install took a long time and the fit was very, very tight. Finding a ball joint press kit at the local auto parts store to rent that fit this part was hard because of the size of ball joint and the press being so tall and not able to lift the truck high enough with a floor jack to get under the press with an impact gun. It really needs a lift to do this lower ball joint well so you can use an impact gun. I am a decent sized guy, and it took two of us with a breaker arm and a pipe extension to pull in unison together to press the ball joint in because of course, they tend to go slightly crooked and are already tight. If you only have a floor jack, buying the lower control arm assembly should be considered even with the extra cost of parts because you must use a breaker bar and not an impact gun. I would also recommend an impact gun for the whole job, not just to press the lower ball joint. As far as the parts, they were all great and quality seemed really good. I would buy again. Shipping was also fast.