Miumaeov 71cc 2-Stroke Gas Powered Post Hole Digger Borer Ground Fence Drill Single Cylinder Drill + 4" 6" 8" Bits (71CC)

Description

The post hole digger is easy to operate with a simple manual start system. The package is equipped with three sizes of drill bits can provide more diversified choices for your work. 2.3kw power and a high speed of 0-300rpm can provide more powerful support for it. It can be widely used to install fence posts, install railings, plant trees and many other lawn applications.

Details

【Shockproof Rubber Pad】 The shockproof rubber pad at the bottom of the power head can effectively enhance the stability of the product when working so that you can better use and operate it.

【Dual Handle Design】 The design of a dual handle can provide you with maximum leverage and stability when working.

【Three Digging Bits】 The package comes with a 4 inch digging drill, a 6 inch digging drill, and an 8 inch digging drill.  You can freely choose the most appropriate one for your work.

Application

This product is applicable to frozen soil, clay, hard soil, etc. It is very suitable for installing guardrails, installing railings, planting trees and many other lawn applications.

Specification

Material: Alloy Steel, Aluminum Alloy, Metal, Plastic, Rubber

Color: Orange, Black

Process: Painting

Assembly Required: Yes

Cooling System: Air Cooling

Number of Cylinders: 1

Auger Type: Bit

Starting Method: Manual Start

Mode Of Operation: One Person Or Two People

Mixing Ratio: The Ratio Of 93# Gasoline To Two-Stroke Engine Oil Is 25:1

Output Shaft Diameter: 20mm/0.79in

Applicable Brill Size: 10cm/4in, 15cm/6in, 20cm/8in

Weight: 10Kg/22.05lbs

Displacement: 71cc/0.004cu in

Maximum Power: 2.3kw

Speed: 0-300rpm

Fuel Tank Volume: 1000ml/33.82 Oz

Product Size: 50*30*30 cm /19.69*11.81*11.81 in

Package Size:  46*37*33cm/ 18.11*14.57*12.99in

Package Included

1 x Machine

1 x Funnel

1 x Oil Bottle

1 x English Instruction

3x Drill Bits: 4", 6" and 8"

1x 12" Extension Bar

All Accessories for Installation

Notes

1. Please close the damper before starting the cold machine, and open the damper during normal operation.

2. Before leaving the factory, we added butter to the gearbox. After working for a period of time, please add butter appropriately according to your use frequency.

3. When you are starting, please start quickly. Don't stop when pulling the rope, pull it slowly.

4. Before starting, press the oil bubble several times and check whether there is oil in the oil pipe.

5. When the cold machine starts, please close the baffle first, and then open the baffle for normal operation.

6. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.

7. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.