X1 H412VW 48 in. 12-Outlet Hardwired Power Strip

(No ratings yet)

Key item features

Specs

Brand
X-1
Color
MultiColor
Amps
15 Amps
Volts
110 V
Watts
1440 Watts
Input voltage
110 V

Current price is $83.49

Price when purchased online

Out of stock

How do you want your item?

Out of stock

Report an issue with this seller

About this item

Product details

Features

48"/1.22m Durable Steel Hardwired Power Strip, White
No Ears (without Mounting Tabs) on both Ends
12 White US NEMA 5-15R Outlets, Vertical Orientation
Hardwired without Power Cord for Mounting at Your Desired Location
6 Easily Punched off Knockouts on Each Side C (Top/Bottom Cover, Both Sides and Ends)
ETL Approved and Listed (Conforms to UL 5 and CAN/CSA C22.2 No. 62)
Electrical Ratings: 125V/15A/60Hz/Recommended Max Load 1440W
Ample Space between Outlets
Back Cover Easily On/Off, Where Wires Are Connected
Wires Readily Striped for Easier Removal and Faster Installation
Great for Contractors, Electricians and Installers, as well as DIYers

Installation Guide:

Before installation, you may need to get a 3/8" wire clamp connector and 3 wire connectors (or terminal connectors). Decide your wire gauge, and ask store attendant for assistance what connectors you should get) from your local hardware, electric supply or home improvement stores
Minimum tools required: A fine to medium fine philips screw driver, and a pair of scissors, and a pair of mid size slip joint pliers, Turn off electricity in the house.Decide where to place this Hardwired Power Strip unit, Choose the knockout to be used for cord exit, then gently punch it off with the back of a screw driver or other tool handy,Unscrew the back cover off the unit with a philips screw driver
Take out the white/transparent plastic insulation sheet, and use a pair of scissors to cut a hole on it (about 3/4" in diameter, or big enough for) WHERE the wires will run through. If the bottom knockout on the back cover is to be used for wire connection, a wire clamp connector may not be needed, thus, please ignore step 6, 7 and 9 below
Put on the 3/4" wire clamp connector in place. Secure its installation by tightening the big ring screw (inside the casing) with the pair of slip joint pliers
Run the wires through the wire clamp connector, from outside into the Unit. In case bottom knockout on the back cover is to be used for wire connection, please run the wires through the back cover first and then the plastic insulation sheet, now with the knockout coin punched off, from outside to inside Match the colored wires and secure the wire connection with proper wire connectors Tighten the two pressure screws properly on the wire clamp connector Place the plastic insulation sheet back and screw the back cover on

Mount the unit:

For unit with ears (mounting tabs on both ends): mount the unit through the ears with screws provided
For unit without ears, place the unit where it is intended to be, mark where to install clips, secure the clips with screws provided. Then snap the unit in onto the clips
For models without ears up to 24, and models with ears above 30, mounting holes on the back cover could be used to secure the unit (but a unit CANNOT be installed with such mounting holes if the unit is to be placed against a wall/cabinet on the side since the unit cannot be reinstalled onto the back cover). Then, please mount the back cover first and then carefully screw the unit onto the back cover Turn electricity back on, it is ready to go

Specifications

Size: 48 in.
Outlets: 12
Dimension: 48 x 1.61 x 1.16 in. (1219 x 41 x 29.5mm)
Weight: 4 lbs

- SKU: EDSTR1206

X1 H412VW 48 in. 12-Outlet Hardwired Power Strip

info:

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Specifications

Brand

X-1

Color

MultiColor

Amps

15 Amps

Volts

110 V

Warranty

Warranty information

Please be aware that the warranty terms on items offered for sale by third party Marketplace sellers may differ from those displayed in this section (if any). To confirm warranty terms on an item offered for sale by a third party Marketplace seller, please use the 'Contact seller' feature on the third party Marketplace seller's information page and request the item's warranty terms prior to purchase.