Presonus AIR-series AIR10 - Speaker - for PA system - 2-way

Key Features and Benefits:

• Optimal response
  AIR10 loudspeakers use the respective strengths of Class D and Class A/B amplifiers to provide optimal response throughout the speaker's frequency range. A Class D amplifier powers the 10-inch low-frequency driver, providing efficient, clean low end when you need it. A Class AB amplifier powers the 1-inch high-frequency driver, delivering a natural sounding, "AIR-y" high end. The combination can deliver up to 121 dB SPL of sweet, clear sound between 66 Hz and 20 kHz.
• Fast and easy customization
  The AIR10 loudspeaker is equipped with an easy-to-use signal processor that makes it simple to customize your loudspeakers with the push of a button. Presets customize the AIR10's response for use as front-of-house mains; as monitor wedges; for music playback (e.g., for DJs); for enhanced low end and a warmer sound; and for improved speech intelligibility. Treble and bass controls let you boost or cut by 10 dB to compensate for room anomalies. Location presets let you optimize performance for stand and bracket mounting as well as flown installations.
• Versatile mounting for a variety of applications
  The AIR10's molded plastic cabinet can be mounted in several ways, providing tremendous versatility. The multi-angle enclosure sports nonskid rubber feet on the bottom for upright front-of-house use and nonskid rubber feet on one side for stage monitor applications. Rig the speaker using M10 fly points, yoke-mount it to walls or beams, or ground-stack it for portable applications.
• You'll be floored
  If you place a loudspeaker against a hard surface such as a wall or floor, the low frequencies emitted from the rear of the enclosure propagate back into the room. This effect, called "half-space loading", can increase the output of bass frequencies by as much as 6 dB, and it is an unavoidable issue with floor monitors.
• Flexible inputs
  AIR-series full-range loudspeakers offer a choice of inputs so you can use them with a variety of sources. You get two combo XLR mic/TRS line inputs, each with a Class A microphone preamplifier and independent gain control. A stereo 1/8" connection admits signals from smartphones, tablets, and other consumer audio devices. These signals can be combined with the AIR10's internal mixer, and a balanced XLR mix output lets you send pass the signals to other AIR-series loudspeakers.