JVCC HZ-8LP Laminated Premium Hazard Warning Tape is a PVC vinyl tape with a 2 mil over-lamination. The tape is scuff resistant and it resists oil, grease, solvents, and moisture. JVCC HZ-8LP is used for marking fire equipment, exits, hazardous areas, floors, and first aid points. It also meets government specification A-A-1689B Type II.
NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 16.5m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
Technical Information - Core: 3 inch diameter neutral
- Backing/Carrier: polyvinyl chloride (PVC) film
- Adhesive: rubber
- Standards Met: CID A-A-1689B Type II
- Thickness: 9 mils (carrier, adhesive)
- Adhesion: 22 ounces per inch (to stainless steel test panel)
- Tensile Strength: 33 pounds per inch (longitudinal)
- Elongation: 200 %
