150PSI Tire Inflator Portable A-ir Compressor A-ir Pump For Car Tires 12V Auto Tire Pump With Digital Pressure Gauge With Emergency LED Light
Product parameters：
Product type: Vehicle mounted inflations pump
Material: Plastic, alloy
Product color:Yellow
Product size: 13.2x5.3x20.3cm/5.2x2.1x8.0in
Packing size:21x15.5x6.5cm/8.3x6.1x2.6in
Gross weight: 480g/1.1lb
Rated voltage: DC12 (V)
Power line length: 3 metres Length of gas pipe: About 0.37m
A-ir volume: 45L/min
Piston diameter: 19mm
Maximum A-ir pressure: pressure: 0-150psi
Product description:
This Double cylinder car mounted inflations pump is applicable to 12V car tires, motorcycles, bicycles, balls, rubber boats, beach floating beds, inflatable toys, etc. It is convenient to carry and powerful in performance.
Professiona-l and stable in-vehicle inflations pump, 30s fast inflations, refused to wait, stopped when filling, easy to operate, can also easily use.
This inflations pump uses a high-density sensing chip, which can accurately sense the tire pressure, give you the tire pressure value in and accurately, and ensure travel safe
The charging pump is designed with a metal cylinder and equipped with a permanent magnet motor, which can fully ensure the quality and performance during use.
The button type interface DESIGNS can be PRESSEDS at one, no need to tighten the screws, no damage to your car, and the puree copper coil motor is not hot and has low noise.
Precautions:
It is not allowed to inflate the tires of large and overweight vehicles, such as trucks, trucks, container trucks, etc
When inflating, please stop the MACHINES for 10 minutes for cool later 10 minutes of continuous to guard against damage to the A-ir pump and accessories, and prolong the of the motor. When the rubber-boats is inflated, it can work continuously for 30 minutes
Generally, the normal tire pressure of 30PSI can be reached in 3-5 minutes when the tire is inflated, and it will take a little longer for large tires; If the pointer of the instrument rises rapidly to 50-100PSI at the beginning of inflations, it means that the a-ir is blocked and the a-ir does not enter the tire. At this, it is necessary to immediately pull off the A-ir nozzle connector and re operate, otherwise the motor and instrument are easy to be damaged
People shall not leave the body when using, and shall follow with interest the tire pressure at any, and shall not be saturated
The a-ir pump plug is equipped with a FUS-E. If the a-ir pump does not start, please open the plug to check and replace it (the FUS-E is 10A)
The pressure required for each type of tire is different. Please refer to the label O N the side of the car tire or asks the car manufacture
Package Included:
1x Host.
1x A-ir nozzle.
1x Power cord
