Turbine Shaft Teflon Seal Installer Transmission Tool For GM 4L80E/4L85E 2974

Item Description:

Turbine Shaft Teflon Seal Installer Transmission Tool For GM 4L80E/4L85E 2974

Application:
-- Help with the installation and re-sizing of the 4L80E & 4L85E Turbine Shaft Seals.
-- Works with all input shaft lengths
-- Similar to # For J-38736, Tool T-2974 &T-2974-M

Function:
-- The re-sizer prevents improper installation and damage of the seals.
-- Prevent distortion during installation.

Simple to use:
1. Properly remove the old seals, make sureall seal debris is removed from each groove.
2. Lube the grooves, new seals, and tools with trans-gel.
3. Expand the seals for the small end first to the proper ID.
4. Center the new seals in the grooves and gently apply finger pressure to ensure the seals are inserted into the grooves.
5. Slide the small re-sizer over the seals using the LONG TAPERED END first, this will ensure the seals are gradually seated into the grooves. NOTE: using the short tapered side first may cause the seals to roll out of the grooves and permanently damage them!!!
6. Let the re-sizer set the seals for atleast one minute, then flip the re-sizing tool now using the SHORT TAPERED SIDE to insure both seals are properly sized.
7. Repeat the same steps for the large end making sure all grooves, seals and tools are properly lubed with trans-gel before installation.

Packageincluded:
1 x Universal Seal Expander for both ends;
1 x Small End Teflon Seal ReSizer;
1 x Large End Teflon Seal ReSizer.