8 Pole Magneto Stator Coil + Voltage Regulator + Gasket Set for Kawasaki KLX110 2003-2009
Characteristics:
Kit includes stator, rectifier regulator and gasket.
Meets or exceeds OEM quality; direct replacement for the original unit.
Perfect fit and ready to install.
Always use a sealant to assemble the gland seal.
Does NOT include instructions.
ATTENTION:
One of the most common reasons for stator failure is a broken regulator, which quickly burns out the stator.
Therefore, we strongly recommend that you replace both parts.
Technically modified stators cannot be changed.
This regulator is not suitable for lithium-ion batteries! The battery or other electrical components could be damaged!
Specs:
Condition: Aftermarket 100% Brand New
Type: Stator and Regulator Kit
Other specifications:
Stator
Number of cables: 3
Number of connectors: 1
Number of pins: 3
Number of fixing holes: 2
Number of poles: 8
Outer diameter: 88 mm
Inner diameter: 29 mm
Includes pickup pulsar coil.
Regulator
Number of connectors: 1
Number of pins: 4
Please compare the number of pins and connectors with the previous part before purchasing.
Spare part number:
Stator assembly: 21003-1390
Rectifier, regulator: 21066-1086
Gasket, generator cover: 11061-0125
(Always compare part numbers with the parts diagrams and cross-reference accordingly.)
Compatible Brand/Model/Year:
Kawasaki KLX110 2003-2009
(Compatibility chart is for reference only!)
(Compare with your defective unit and the image we provided to determine compatibility.)
Package Included:
1 8-pole generator stator
1 x 4-pin voltage regulator
1 crankcase gasket
(Delivered exactly as shown in the image.)
Note:
Before installing your new stator/regulator/rectifier:
Check the AC output of the stator.
Replace any burned or corroded connectors on the stator and regulator/rectifier.
Check and repair any melted wiring.
Use high temperature dielectric grease on all connectors.
Our stator/regulator may use a different wire color code than the original.
All cables are installed in the correct order; do not modify the wiring configuration.
This stator is designed as a direct replacement and should be used as such.
When screwing the stator, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct when installing it.
You will receive exactly what you see in the pictures. If in doubt, please compare our item with the original part.
The product offered is an accessory or spare part and is therefore not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is mentioned only as an indication of the product being offered as an accessory or replacement, to clarify which vehicle it is compatible with.
Seller Warranty: 1 month
