This Kit is constructed using High-Quality OEM spec replacements for 1968 and 1969 Ford Falcon. These parts are Factory Design and will only work with Stock Vehicles. This Kit Contains All Of The Pieces Below: Inner Tie Rod Ends (Right and Left), Outer Tie Rod Ends (Right and Left), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Bolts (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Shaft Kits (2 Each), and Strut Rod Kit (4 Each). This Kit Also Contains The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.
YEARS: 1968 and 1969; MODELS: Compatible with Ford Falcon; HIGH-QUALITY: OEM Spec Replacement; INCLUDED IN THE 20 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Sway Bar Bolts (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (2 Each); ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.
