Car Wheel Hub Decorative Strips Tire Protection Rings Anti-collision Anti-scratch Decorative Line Modification Supplies

Installation Method

1. Clean the wheels of the four wheels of the car, including the wheel hub protection ring.

2. Dry the dust and water stains on the surface of the wheel hub and let it air dry naturally.

3.Apply the adhesive aid provided as a gift to the area of the wheel hub that needs to be adhered, then let it dry for 3-5 minutes before sticking the decorative strip

4. Tear off a section of the adhesive on the back of this product, use as much as needed, and stick it along the edge of the wheel hub protection ring.

5. After pasting, please cut off any excess decorative strips

6. Finally, press the uneven areas with your fingers to maintain a harmonious appearance

Precautions :

1. The edge of the wheel hub should have a flat width dimension of at least 0.5cm.

2. It is not recommended to install car wheels that have undergone frosting or painting treatment.

3. It is not recommended to install if the speed exceeds 180 mph

4. Please install in a sunny or low humidity environment

5. Please heat up after installation and do not use immediately. It usually takes 3-5 hours for normal use.

Please do not wash the car for 3-5 days after installation. If the decorative strip falls off, please replace it in a timely manner.

After pasting the decorative strip, do not rinse it with a high-pressure water gun or drive it too aggressively within 24 hours

Item Length : 8m

Origin : Mainland China

Item Type : Styling Mouldings