4 Wheel Adapter 5x5.5 to 6x4.5 | 5x139.7 to 6x114.3 | Fits Dodge Ram 1500 Hub & Mount Nissan Pathfinder Wheels 05-After

Product Information: These two piece conversion type wheel adapters are used to convert 5 lug 5.5-inch (139.7mm) bolt pattern hub to fit wheels of 6 lug 4.5" (114.3mm) pattern. Adapters are built with 78mm hub centric lip. If your wheels have 78mm bore, they will be centered on the lip for a factory fit. They will space out your wheels for 2-inch. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. Sold as a set of 4 for all four wheels. Hub centric design for a snug fit for factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations. Fit on 5x5.5 Pattern Hub or Fit the Following Vehicles: Dodge: Dakota (05-11), Durango (04-10), Ram 1500 New Body 2/4WD (94-on), Ramcharger (79-83), 1/2 & 3/4 Ton Truck (79-93), Ram Van (85-96) Ford: Bronco (66-on), F 1/2 ton F-100, 150 (54-96), 1/2 Ton E-100, 150 Van (70-96) Hub Centric Fit for Factory Wheels (or 78mm Bore wheels) Compatible with These Vehicles: All Chevy/GMC 6x5.5 bolt pattern (92-on, excluding Colorado, Canyon), Cadillac Escalade, Nissan Titan **Even if your 6x5.5 bolt pattern wheels have a different bore, the adapters are still going to work and it is possible to get a snug fit by using a different set of hub centric rings. NOTE: These will NOT work for the JEEP CJ Adapter Specification: Vehicle Bolt Pattern: 5x5.5-inch (139.7mm) Wheel Bolt Pattern: 6x5.5-inch (139.7mm) Studs Thread Size: 14x1.5 Hub Bore Size: 74mm Hub Centric Lip: 78mm Thickness: 2-inch (50mm) Lug Torque: 95 ft-lbs Black Allen Bolt Torque: 55 ft-lbs