Specifications
Applicable Models: Trucks, Minivans, Excavators, Harvesters, and so on
Condition: New
Color: Grey
Optional Voltage: 12V
Power Supply: 8A
Number of Air Outlets: 4
Material: Copper, Iron
Finish Type: Baking Paint
Fitting Required: 5/8'' (16mm) Inner Diameter Water Hose.
Way of Use: Direct Replacement
Mounting Type: Car
Assembly Method: Closed
Gross Weight: 3kg/ 6.6 lbs
Product Size: 23*21*10cm/ 9.3*8.5*3.9in
Highlights
Brand New, With High Quality
Direct Fit Replacement
High Thermal Conductivity
Fast Heat Dissipation
Trouble-free Installation
Energy-efficient
Smooth Surface
Fine Workmanship
Fashion Appearance
Robust and Durable
Controllable Speed
Instruction
1. Make sure the direction of flow through the cooling system.
2. Connect the hot coolant hoses to the inlet and outlet of the heater.
3. Wire the heater and switch into your vehicle’s electrical system.
4. The red wire of the switch is connected to the positive pole of the power supply and heater.
5. The blue wire of the switch is connected to the negative pole of the heater.
6. The black wire is connected to the negative pole of the power supply.
Notes
1. In order to install the heater, you have to connect the heater to your engine cooling system. It also has a blower that needs to be wired into your vehicle’s electrical system for blowing warm air.
2. It is strictly forbidden to open the internal circuit and modify the circuit privately, block the air inlet and outlet, and connect firmly when installing, so as to avoid fire caused by disconnection and short circuits in poor road conditions.
3. We strongly recommend professional installation. Please contact us if you have any questions.
4. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you place the order.
Fits (As a Reference)
For Trucks, Minivans, Excavators, Harvesters, and so on
Package Included
1 x Heater
4 x Black Tubes
2 x Tees
2 x Mounting Brackets
1 x Switch
2 x Straight Fittings
7 x 16-25mm(0.6-1.0in) Hose Clamps
