Air Conditioner AC Compressor Clutch Kit 6 Groove for Toyota Camry 12-17 2.5L for Toyota RAV4 09-12 for Toyota Sienna 11-13 2.7L Drive Pulley w/Bearing for TSE17C/TSC17C Compressor
Air Conditioner AC Compressor Clutch Kit 6 Groove for Toyota Camry 12-17 2.5L for Toyota RAV4 09-12 for Toyota Sienna 11-13 2.7L Drive Pulley w/Bearing for TSE17C/TSC17C Compressor
Hero image 0 of Air Conditioner AC Compressor Clutch Kit 6 Groove for Toyota Camry 12-17 2.5L for Toyota RAV4 09-12 for Toyota Sienna 11-13 2.7L Drive Pulley w/Bearing for TSE17C/TSC17C Compressor, 0 of 7

Air Conditioner AC Compressor Clutch Kit 6 Groove for Toyota Camry 12-17 2.5L for Toyota RAV4 09-12 for Toyota Sienna 11-13 2.7L Drive Pulley w/Bearing for TSE17C/TSC17C Compressor

(No ratings yet)

Key item features

  • [Fitment] This AC Compressor Clutch suit for Toyota Camry 2012-2017 L4 2.5L, for Toyota RAV4 2009-2012 L4 2.5L, for Toyota Sienna 2011-2013 L4 2.7L, OE Number:158367/88310OR010/8831042330/8831008080/88310ORO11/8831042331/8831008081/88310ORO12/8831042332/8831008082/883100RO13/8831042333/8831008083/883100RO14/8831042334.
  • [Function& Specification] Compressor Style: TSE17C/TSC17C, Pulley Groove Quantity: 6. Voltage: 12V, Pulley Diameter (MM): 125mm/4.9in. Use to repair or replace the clutch system in an automotive AC compressor on AC system, It engaging and disengaging the compressor pulley to control refrigerant flow. Air conditioning compressor clutch can solve the clutch stop rotating, not meshing noise, leakage, engine overload and other problems.
  • [Reliable Quality] Steel Clutch Pulley Contains a sealed ball bearing for Rotates with the serpentine belt when the AC is off, aim for withstand constant belt friction and rotation, wear resistance and heat dissipation. Spring steel Snap Rings & Shims for Adjusts the air gap between the clutch pulley and hub, Secures components in place.
  • [Installation] 1. Disconnect the car battery and Locate the AC compressor (usually belt-driven, near the engine). 2. Remove the Serpentine Belt, Disconnect the Clutch Electrical Connector, Remove the old Clutch Assembly( deattatch center bolt, the hub, snap ring, pulley and clutch coil). 3. Install the New Clutch Kit, Slide on the new pulley and secure it with snap ring, press hub onto, Adjust the Air Gap by Add or remove shims.4. Reassemble & Test the AC system(no noises, cold air output).
  • [Package] Included: 1x Pulley With Bearing, 1x Snap Rings. Please replace AC Clutch if met: Worn-out clutch bearing, Damaged coil or electrical failure, Physical wear on the hub or pulley, AC compressor not engaging properly.
Price when purchased online
Report an issue with this seller

More seller options (1)

Starting from $51.49

About this item

Product details

Specifications

Warranty

Warnings

Customer ratings & reviews

0 ratings|0 reviews
This item does not have any reviews yet