For 3018Pro/ Cnc Grbl Z Probe Cnc Z-A Xis Router Touch Plate Tool Setting Probe Accessories Household Woodworking Equipment

Product Description:
brand new high quality
Made of high quality material,
For 3018Pro/ CNC for Grbl Z Probe CNC Z A xis Router Touch Pad Tool Set Probe
how to use:
1. The for Alligator clip is fixed on the tool
2. The port has been connected to the control board (the A5 port on the 3018pro control board)
3. Place under the tool (plastic + aluminum plate)

【Z-probe】CNC Router Tool Setting Automatic tool setting instrument. Thick ness: 1.6mm (±0.03mm)
【Tool setting function】 It can accurately locate the working , which is most suitable for PCB engraving.
【Probe 】Please change the Probe in for Grbl to: G91G21G38.2Z-30F100;G92Z1.6;G0Z5F10

What does G91G21G38.2Z-30F100;G92Z1.6;G0Z5F10 mean:
G91: use relative coordinate mode
G21: use mm unit
G38.2: Tool setting
Z-30: Move 30mm in the negative direction of the Z a xis, stop when it touches the tool setter, and use this as the
F100: Z- running speed
 ;: newline, next instruction
G92: Coordinate offset, because the tool setting instrument has thick ness, in order to remove the thick ness of the tool setting instrument, it is necessary to set the offset
Z1.6: Z- offset 1.6, 1.6 is the thick ness of the tool setting instrument, the thick ness measured by the tool setting instrument shall prevail
; : newline, next instruction
G0: fast movement
Z5: The Z moves to the position of coordinate 5, which is convenient to take out the tool setting instrument
F10: Z- upward movement speed

Package Included:
1 * CNC Z router touchpad tool

Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.