Warn: It is illegal to ride electric scooters on public roads, pavements, or cycle paths. They are intended only for use on private land with the owner's permission.
This controller is a single Hall assist program.
The display defaults to Protocol No. 2 ，only support NO.2 Lithium,do not support others， pls pay attion before you place the order
feature:
*Made of high-quality materials, ，made of high quality metal material with grooves design, able to protect the internal circuitry from thermal overload.
*suitable for 10 inch electric scooter and ebikes
*A kit with a LCD display is available as an option, up to 250-350W E-Scooter Controller+Display Control Panel，better compatibility
*350-350W power,Fully satisfy your need for speed, you can enjoy cross-country or hill climbing
*easy to install and use,equipped with wiring identification diagrams to provide steady speed and sensitive braking and directional change control.
Specification:
product name: Electric Scooter Controller
Material: Aluminum Alloy + PCB + Plastic
Color: As Picture Shown
Application: for ebikes， electric bikes, 2 Wheeled electric Scooter
Product Size: Approx.99x70x33mm/3.9x2.8x1.3in
Gross Weight: Approx.240g/8.5oz
Rated working voltage range:
24V/36V/48V/60V Rated power selection range: 150W - 350W
Maximum current selection range: 10A - 20A(default 13A)
Parameter setting interface P03, set battery voltage 24/36/48/60V. Currently set to 36, the battery parameter automatically switches to a 36V lithium battery
Parameter setting interface P05, set the gear
Parameter setting interface P06, set the wheel diameter unit inch with an accuracy of 0.1 inches.
The setting range is 5 to 50, and the current setting is 26.0 inches
Parameter setting interface P07, set the motor magnetic pole ratio, which is calculated based on the number of magnets and the reduction ratio. The larger the value, the slower the displayed vehicle speed
Parameter setting interface P09: If the startup mode is set to 0, it will start from 0
For a non0 start, the speed of the run-up must reach 6km/h for the handlebar to be effective
The parameter setting interface is P12. Set the range of the assist start-up intensity from 1 to 5, with 1 being the weakest and 5 the strongest. The start-up process time increases from 0 to 100%, from weak to strong
Parameter setting interface P11, set the power-assisted start sensitivity, range 1-24, with 1 being the most sensitive and 24 the least sensitive
Voltage: 48V/36V /24V options
Current: 21A
power：up to 350W
cable ： 5pin
Package content:
1x S866 display
1x cable
1x controller
