DW712 DW715 DW716 Switch Replacement - DeWalt Miter Saw Trigger Power Switch with 2 PCS Motor Carbon Brushes for DW717 DW718 DWS780 Models

Switch type: hanging trigger switch (with large button) Electrical parameters: 125/250V, 24A/12A Switch size: 3.6"L × 2.16"W × 0.86"H Carbon brush size: 2.13"L × 0.84"W × 0.24"H Compatible models: DeWalt DW712, DW715, DW716, DW717, DW718, DWS780 【Installation Guide】 Safety Preparation: Disconnect the power supply and confirm that the device is completely stopped. Remove the old parts: Use a screwdriver to remove the old switch assembly, paying attention to recording the connection order of the line. Install new switch: Fix the new switch in the original position and connect the line (note the polarity reversal function interface). Replace the carbon brush: Simultaneously replace the motor carbon brush (the motor housing needs to be removed, it is recommended to be operated by a professional). Test operation: No-load test switch function and speed change effect, and use it formally after confirming that it is correct. 【User Tips】 ⚠️ Be sure to check the original number and size before installation to avoid mismatch of the model. ⚠️ If you need to cut hard materials such as steel, it is recommended to check the wear of the switch and carbon brushes regularly. ⚠️ Keep the work area clean and bright during operation to avoid using it in explosive environments