Professional Grafting Shears with Replaceable Blades - U, V, Ω Cut Pruning Tool for Fruit Trees, 5mm-1.4cm Cutting Diameter, Carbon Steel & ABS Construction

Professional Grafting Shears with Replaceable Blades - U, V, Ω Cut Pruning Tool for Fruit Trees, 5mm-1.4cm Cutting Diameter, Carbon Steel & ABS Construction
Features:
Rootstock and scion it is easy to match the U-cut,V-cut or Ω-cut Using easily and fastly. Grafting than the traditional savings the and effort
Blade can be replaced
Use the pruner to cut useless branches from the plant
Materials: carbon steel,ABS Color: black Cut grafting stocks diameter from 5mm/0.2"-1.4cm/0.55" Trimming blades thickness: 3mm/0.12" Size: 22cm x 10cm/8.66inch x 3.94inch (1cm=0.39Inches) How to use:
Step 1: Hold the grafting stock in the grafting tool the handle to make the cut, this step to cut from the donor plant.
Step 2: Slide the donor into the groove of the stock plant, matching the cut surfaces as closely as possible.If the stock and donor plant are not the same size, match on the side .
Step 3: Place sterlizing around the joint, and bind with tape,the sterilizing will against weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.
Step 5: The grafting tool with "V & U & Ω" blade and the end of blade both can cut, piece blade can be used as two blade,so you have total six blade.
Note:
Keep out of children
Do not use on dry or old hard wood
Package Included:
1 x Fruit Tree Pruning Shears Grafting Cutting Tool