Applies to H4 30000lm LED Headlight Kit for Toyota High/Low Beam

-Package Included:

---A couple of

Factory Replacement H4 Halogen Bulbs for High and Low Beams - Headlight Bulbs:

Plug type: H4/9003/HB2 (high beam and low beam)

Power: 200W per set, 100W,

Bulb luminous flux: 3000 lm/set (1500 lm/bulb)

Condition: 100% New/Never Used

Voltage: DC 9-32V (fits 12V, 24V vehicles)

IP Rate: IP68

LED type: 2-sided 35 70 CSP LEDs. temperature

Color: 6500K White Beam Angle: 360° Working Temperature: -40 to +80° Working Life: More than 5000 working hours Number of Bulbs: 2 (Box sent randomly) Fits for Headlights.

Positioning the kit on the vehicle: left, right, front

Material

: Aviation 6063 aluminum profile Application: headlight

(high or low beam headlights) (it is perfect for those looking for better lighting output and a more aggressive look for their driving).

/////NOTE:

Q1: How do I know these LED bulbs are suitable for my vehicle?

Please refer to your vehicle's owner's manual or the original halogen bulb, the part number is marked above.

Or, in Customer Questions & Answers, enter your vehicle's year, make, and model, and we'll help you verify it. We invite you to contact us for a free consultation before purchasing a product.

Question 2: Do the LED bulbs plug and play? Do I need any modifications?

A: In most vehicles, these LED bulbs can be plug-and-play installed and can be retrofitted to the vehicle without modification.

Question 3: My item hasn't arrived, why is it taking so long?

A2: Sometimes items take longer than expected, especially if they're going to a remote or rural area. Check with your post office to see if your item has been delayed. If your item doesn't arrive after a few days, let us know so we can check and help you resolve the issue as quickly as possible.

Question 4: My bulbs don't fit, help!

A3: A special bulb holder may be required. Please check if it fits your original bulb holder. If not, please let us know. The bulb size may be incorrect; please double-check the item you received against the item you ordered. Do you have an aftermarket lighting housing? They may not fit perfectly with aftermarket bulbs and will require some manual modification.

Question 5: Why are the headlights not on or come on while they are on?

A: This is usually because the positive and negative poles are reversed. Unlike halogen bulbs, LEDs are sensitive to reverse polarity in some vehicles. You'll need to rotate the plug 180 degrees to reverse the polarity of the bulb holder, then reinsert it. (During installation, pay attention to the position of the car's lights pointing toward the buckle.)

Question 6: Neither side lights up? Both sides flicker, flicker excessively, or operate erratically.

A4: Check the light fuses and then the ballast plugs to make sure they are properly installed.

If this doesn't work, there may be a voltage problem in the vehicle. You probably just need a relay or capacitor. Although some bulbs have built-in resistors, they may require a decoder.

Question 7: Why do I experience flickering, error messages, or radio interference after installing the bulb?

A5: Some car systems are sensitive to LED bulbs, so you need a decoder/resistor to solve the problem.

fermin xieng