Yo
---------- CHARACTERISTICS ----------
1. Integrated IC (current regulator): Prevents LED damage due to voltage fluctuations and spikes, reducing power consumption by 0.80%.
2. The 13,000 RPM TurboCool fan sprays cool air directly through the aerodynamic vents to evenly cool each component. The exquisite heat sink optimizes LED heat dissipation.
3. IP68 Waterproof: Automatic glue injection machine. The fixed hidden ballast is 100% waterproof. This automatic glue injection machine can glue each ballast better than manual. Ensure it is 100% waterproof to adapt to different harsh working environments.
4. With different testing machines, we can design precise parameters for our products, such as output turn-on voltage test, EMC test, wattage test, impulse current test...etc.
5. Simple Installation: Installation only takes 10 minutes. Plug & Play. ( Not all bulbs are CANBUS-Ready. Some cars require decoders or resistors to be installed to avoid flickering or warning )
--------------- PARAMETER ---------------
Model: H7 (High Beam) + H11 (Low Beam)
1. Power: 78 W/Pair, 39 W/Per
2. Lumens: 8000 LM/Pair, 4000 LM/Per
3. Operating voltage: 9-32v
4. LED Type: COB
5. Color temperature: 6000k
6. Opening angle: 360
7. Waterproof: IP68
8. Lifespan: 50,000 real hours.
9. Cooling System: Fan and Heatsink
10. Light color: White.
11. Material: Aluminum
Model: 9145 (Fog Light)
1. Power: 50W/pair
2. Voltage: 12V to 24V (Compatible with 12V, 24V vehicles)
3. High luminous efficacy flux: 2800 lm/pair
4. Waterproof: IP68.
5. Material: Aluminum.
6. Beam angle: 360.
7. Color temperature: 6000k cool white.
8. Working temperature: -40c -+80c.
9. Lifespan: 50,000 hours.
-------- AMOUNT INCLUDED ---------
- 2 x High Beam (H7)
- 2 × Low Beam (H11)
- 2 × Fog Light (9145)
----------- SUITABLE for ------------
for Buick Regal 2011-2016
for Chevrolet Malibu 2013-2016
for Ford Escape 2005-2006
----------------- ATTENTION ------------------
1. For safety reasons, ensure the vehicle has sufficient cool-down time before beginning the installation process.
2. Park the vehicle or make sure the vehicle is running smoothly.
3. Make sure to turn off the ignition switch and remove the key.
4. Be careful to avoid burns, especially when turning the light on or off.
5. Be careful not to crush or cut the bulb. Also, be careful not to touch the bulb with your fingers, otherwise it will dry out.
6. Carefully check the pins, ports and cable connections, as incorrect connections can cause problems.
lighting. When adjusting the bulb, make sure the end of the bulb does not touch the inner cover of the headlight.
Cnsendi
