Notes before installation
Tips 1 Test before installation
When testing, do not remove any protective film or label. Pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the phone's electronic components.
Be sure to wear eye protection and be careful not to cut your finger on glass shards. Tip
2 Simulate a test The
Screen replacement is a very fragile product. We strongly recommend testing before installation. It simulates testing, which means that the mobile phone is separated (motherboard, LCD or audio cable connected to the screen) and a new replacement is connected, powered on and the test is finished. If the test is OK, please install it. If it cannot be displayed, please contact us at the first time. And please do not force it to be installed on the mobile phone. We will not be responsible after the screen is installed.
Tip 3 Do not bend the cable too much
Make sure the LCD cable does not bend too much. If it is bent more than 90 degrees, the screen will go black.
About the product
1.
Replacement LCD touch screen digitizer assembly (TFT material) for Xiaomi Black Shark 4 / Black Shark 4 Pro 2. Replace your broken or unusable item with a new one.
3. Make your device look cooler than ever
4. Fully fit and functioning
5. Each item has been checked and is in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible after the screen is installed.
The hairdresser
