Ceramic Fiber Insulation Blanket 47"×24"×2/5" Fireproof & Heat Resistant Mat for Oven Stoves, Kilns, Forges, Fireplaces

Description:

• Type: Ceramic Fiber Blanket
• Material: Ceramic Fiber
• Color: White
• Item Thickness: 0.4inch(10mm)

Size:

• 12inch×24inch (30cm×60cm)
• 16inch×24inch (40cm×60cm)
• 24inch×47inch (60cm×120cm)
• Odor: No
• Fire rating: Class A
• Adaptation temperature: Up to 2500°F(1371°C)

Perfects For:

1. ​Metalworkers: Shield forges and foundries from extreme heat.
2. ​Construction Pros: Fireproof insulation for boilers and ducts.
3. ​DIY Enthusiasts: Easy-to-handle material for custom projects.

Package include:

• 1× Ceramic Fiber Blanket (Pack by Folding)

Note:

1. Wear gloves and masks during handling to avoid fiber irritation. Store in a dry place to prolong lifespan.
2. Please allow slight dimension difference due to different manual measurement.

Installation steps:

1. Preliminary preparationMaterial inspection: Confirm that the ceramic cotton is not damaged or damp, and its specifications meet the installation requirements.Cleaning the surface: Remove dust and debris from the installation area to ensure a clean and smooth surface.Preparation tools: cutting tools (for cutting), gloves, tape measure, fasteners (nails/tape/adhesive).

2. Cutting ceramic cotton

Measurement dimensions: Use a tape measure to measure the length and width of the installation site, and mark the cutting line.Cutting processing: Cut along the marked line with a tool to keep the incision neat and avoid debris.

3. Install ceramic wool

Positioning and fitting: Lay ceramic cotton flat on the installation surface to ensure a tight fit with the surface.

Fixed method:Small area: Use tape to stick and fix along the edges.Large area/high temperature environment: Reinforce with nails, screws, or high-temperature resistant adhesives, with evenly distributed fixing points.Splicing treatment: Align and fit the joints, and fill the gaps with aluminum foil tape or fireproof sealant.

4. Check the conclusion

Check the sealing: Confirm that the ceramic cotton has no curled edges or gaps, and that the edge sealing is complete.Clean up the site: Remove excess debris and keep the environment clean.