Introduction:
The ultrasonic industrial humidifier is a device that uses the principle of ultrasonic high-frequency oscillation to atomize water into ultra-fine of 1-5 microns, and then uses a pneumatic device to diffuse the water mist into the air, thereby achieving uniform air humidification without heating adding chemicals, allowing it to float in the air, thus achieving humidification. Appropriate relative humidity plays a decisive role in improving product quality, reducing scrap rate anti-static, dust removal, air purification, and environmental improvement.
Parameters:
Fog volume: ≥ 2.0kg/h
Humidity: 1%-99%
Power supply: 110V
Power: 200W
Control method: Humiditycontrol Time control
Reference usage space: 30-60m³ (1059.44-2118.88cu.ft)
Mist Outlet: 4.33inch（110mm）*1
Water supply quality: Purified water, tap water (softened)
Air Volume: 170m³/h
Instructions for Use:
For the first use, it should be placed at room temperature for half an hour before turning on and using.
Use clean water with a temperature below 40 degrees.
Keep other home appliances away from the machine while it is working.
Please do not add additives that are not produced or supervised by a professional production line to the water.
Do not place the humidifier on hollow objects to avoid resonance noise.
Please do not turn on the machine without water.
Turn off the power and water when no one is around.
When the humidifier system is not used for a long time, the excess water in the water tank should be drained to prevent the water from soaking the atomization module for a long time, accelerating the aging rate and affecting the service life of the humidifier.
Since the size of items placed in the factory, the number of machines, air intake, exhaust, and temperature levels all affect the indoor humidity, is recommended to appropriately increase the humidification capacity when selecting the model.
Do not move the humidifier during use to avoid causing other problems.
Cleaning method:
Turn off the power, unplug the plug, close the water inlet valve. Open the drain valve, empty the water tank, open the plate on top of the fan, and remove the wind shield.
Use soft, clean cotton cloth or sponge to clean the inside of the water tank and the atomization module, and wipe it clean. If there is scale, you can rinse it several times with clean water. Do not use hard objects such as steel wire balls to wipe the atomization module to prevent damage.
Note:
The water tank and the internal atomization module of the humidifier should be cleaned regularly, it is recommended twice a month.
Do not place foreign objects, or liquids with high oil or alkalinity content, at the mist outlet.
Item Number:
Ultrasonic industrial humidifier cooler sprayer 2.0kg/h--191066
