JVCC DCT-39A-B Double-Sided Black Tissue Tape: 2 in x 60 yds. (Black)

JVCC DCT-39A-B Double-Sided Black Tissue Tape is a non-woven tissue tape coated on both sides (AKA double-coated) with a modified, solvent-free acrylic adhesive, wound on a gold paper release liner. The tape exhibits a strong direct tack and continuous adhesive strength, as well as dynamic shear strength on most surfaces. Since it is a tissue tape it is also hand tearable; no scissors required. DCT-39A-B is an excellent corrugators' splicing tape. Also no plasticizer migration on most surfaces. Used in manufacturing for continuous web processes when a visual splice is needed. Good temperature, UV and aging resistance.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Warning: This product can expose you to chemicals including Silica, crystalline (airborne particles of respirable size), which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/.

Technical Information
- Core: 3 inch diameter neutral
- Backing/Carrier: tissue paper
- Adhesive: solvent-free acrylic
- Release Liner: gold siliconized paper
- Thickness: 3.9 mils (carrier, adhesive) 0.5 mils (carrier)
- Adhesion: 47.5 ounces per inch (to stainless steel test panel)
- Service/Operating Temperature: -40F to 320F
- Elongation: 1 %