Features
Compact Design
Overload / Phase Loss / Locked Rotor
protection
D-Time / O-Time Integrated
Manual / Electric Reset
Low Energy Consumption
(No Volt Release / Fail-safe Operation)N Type
Direct start / Suitable for small motor protection
wiring simple
Used for
- Low Voltage Induced Electromotor (600V Level)
Protective Relay
- Break-Down Watch Current Relay
- Alternative Replacement for the Existing Relay
Protetcion
Protective Item Operating (Trip) Time
Over-current = O-TIME
Phase Loss = O-TIME
Lock Rotor = O-TIme
LED
Ammeter Function:
After the motor runs smoothly, turn the overcurrent setting knob slowly counter clockwise to the red indicator light, which is 100% of the actual running current. And then turn the knob clockwise to just turn off the red light at this point for the actual running current value of about 103%.
Run / Operation Indicator:
Relay Trip: Orange LED
Power / normal operating status: Green LED
Manual / Electric Reset
With test button held down,the orange LED is on and the product will trip after O-TIME.
The relay will be de-energized when RESET button is pushed or the control power is disconnected.
Set
Set knob: O-TIME(Over-current run time) Set less than the motor's endurance time with over-current.
Set knob: Load(Rated Current) Set over 110% of the motor's rated current of under 120% of its operating current
TEST Instruction
With test button held down,the orange LED is on and the product will trip after O-TIME.
The relay will be de-energized when RESET button is pushed or the control power is disconnected.
LED Indication
Item PWR(Green)LED Trip(Red)LED
Power Source : AC
Theory : Thermal Relay
is_customized : Yes
Contact Load : Low Power
Model Number : EOCRSE2
Voltage : 240V
Use : Protective
Protect Feature : Sealed
Current Range(A) : 0.5-6A / 3-30A / 5-60A
Main Circuit Wiring : Through Core
Relay Output : 1c
Protected Object : motor
model : EOCR
