Armor Epoxy Primer and Top Coat for Concrete and Garage Floors

First I cleaned both the concrete block walls and the concrete floor with Muriatic acid. The Muriatic acid drew out a bunch more inflorescence that I could not even see when I started cleaning. Next I neutralized the acid with an ammonia water solution. I wanted everything as clean as possible before I put the epoxy coating onto the surface. The epoxy mixed real easy. Went on great. I put two coats on quickly as per the directions. There was a little inflorescence on the block when I cleaned it. When I was done the walls and floors had a nice sheen to them. Great product. Only issue is that as with most every time I buy paint I ended up with a lot more product than I needed based on the recommendations. However, I am definitely a better to much than too little guy.

I had a basement room that had some moisture vapor coming through the cement walls or floor. I used this on both the walls and floor in the Spring and have had no noticeable moisture during the Summer. Applied it with a roller and it went on easily. I would recommend not to use a thick a roller since it is water-like. I used one coat. It dried fast and I applied an epoxy paint over it per the instructions. Customer service was helpful with my application questions.