For KTM 450 / 525 XC ATV 2008 2009 450 / 505 SX ATV 2009 2010 Motorcycle DualControl Brake Lever Enlarger and Riser

The average person takes 0.5 to 1 full second to react to hazards. Traveling at 60 MPH, a rider will travel 25 to 50 feet before being able to properly react. Most OEM brake pedals have a single-positioned small footprint, yet most ADV riders substantially change foot positioning as they switch between standing and sitting. If your foot is not already situated correctly on the rear brake pedal, you are now potentially doubling reaction time and distance to make what could be a critical stop. This is why you see all motorcycle racers with 1 or 2 fingers on the front brake lever in photographs. This System has taken away this additional hazard with the DualControl Brake System. There are two parts to this System that enhance control and reaction time; a riser and an enlarger plate.When in a seated position, a rider?s bent knee naturally puts the angle of the foot pointed down 90 degrees from the lower leg, while a standing position creates a straighter leg and raises the angle of your foot to a more horizontal position. Using the OEM brake pedal, there is no way to keep the correct brake control position when both sitting and standing. With the enlarger and riser combined, there are now two levels in which to engage the rear brake, putting your foot in optimal position regardless of riding position.Fitment:For 450 XC ATV 2007-2009 For 525 XC ATV 2008-2009For 450 SX ATV 2009-2010For 505 SX ATV 2009-2010