Car Dent Puller Repair Tools T Dent Remover Kit Auto Body Paintless Body Part Tool Sheet Metal Slide Removal Hammer

How to use:
1.Clean the dent with a clean wet cloth;
2.Mount the into the glue , pull the trigger to let the enter into the glue , connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the
drawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
Colour:Photo Color
Material:Metal

Package Contents:
1 x Car Dent Puller Tools
18 x Blue Glue Tabs/ Lifter Glue Puller

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.