Electric Mini-Tank Water Heater, 110V 2.1 Gallons 1.5KW Instant Point of Use Hot Water Heater for Rv Trailer Bathroom Kitchen Under Sink Counter Cupboard 8L

Description

Do you live in a place with limited space and worry about insufficient hot water supply? This mini-tank water heater can quickly heat water and has good insulation. It can also provide you with a continuous supply of warm water through automatic water replenishment, making your winter no longer cold and feel the warmth of home!

Details

Rounded Corners: Its entire body adopts a rounded design, which is both cute and avoids unnecessary scratches.

Indicator Light: In addition to the LCD display screen, two indicators display the heating and insulation status, and you can easily see its working status at a glance.

Application

It is very suitable for being installed in areas such as kitchens, bathrooms, RVs, etc. that require hot water but have limited space.

Specifications

Color: White

Shape: Rectangle

Material: 304 Stainless Steel, 316L Stainless Steel, ABS

Water Inlet Mode: Top Water Inlet

Style: Vertical

Plug: US-Standard

Wire Type: Plug-In

Power Source: Corded Electric

Number of Items: 1

Capacity: 8L/2.1gal

Temperature Regulation Range: 30-65°C/86-149°F

Power Cord Length: 0.9m/2.95ft

Voltage: 110V

Exhaust Pipe Length: 0.6m/1.96ft

Rated Power: 1500W

Rated Pressure: 0.7MPa

Waterproof Level: IPx4

Reserved Installation Height: 100mm/3.94inch            

Gross Weight: 4.25kg/9.37lbs

Net Weight: 3.9kg/8.59lbs

Product Size: 27.9*21*28cm/10.98*8.27*11.02in

Package Size: 37*35*34cm/14.56*13.78*13.38in

Package Included

1*Electric Water Heater

1*Safety Valve

1*Exhaust Pipe

1*English Manual

All Accessories for Assembly

Notes

1. When used for the first time, please fill the water first and then power it later.

2. For your safety, please properly connect the ground wire and do not use a mobile socket.

3. Please note it is strictly forbidden to plug the outlet of a one-way relief valve, and the additional pressure is greater when the inner tank is heated by thermal expansion. At 0.75 mpa, the one-way safety valve will automatically drip and release pressure to ensure safety.

4. The connection pipe of the water supply pipe and water heater must be all metal tubes. not plastic.

5. When not in use for a long time (over 24 hours), please turn off the water supply and disconnect the power supply.            

6. Please note that the installation of this product requires the following conditions: running water with a water pressure of 0.1MPA, a cold and hot type faucet, and a three-plug power socket (the installation position of the water supply tower should have a drop of more than 5 meters from the water tower).

7. Please note that this product can only be installed vertically. It is recommended to install it under the water basin. And install the anti-electricity wall at the red hot water outlet and the pressure relief valve at the blue cold water inlet.

8. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.