Water Floor Heating System 3A Smart WIFI Thermostat Central Heating Wiring Centres Hub Controller Actuators For Gas Boiler ,Easily DIY

Description:

HY525 wired master control panel is used to control water pump, Boiler, thermal actuator, motorised valve etc. HY525- Hub Controllers is used in water underfloor heating system. It can control zone valves, or boiler thermostats. As central control unit, it can also control boiler and circulating pump. According to user's set temperature, hub controller can control to open or close boiler, circulating pump and electric actuators, to achieve the purpose of comfort and energy consumption saving.

Notice: If you need manual before buying, please contact and provide your e-mail address, then we will send the manual to your mailbox, thanks!

1. Subcontroller Thermostat

2. Boiler

3. Thermal actuator

4. HY525-Hub Controller

Technical Data:

Color: White

Power: 170-240VAC50/60Hz

Relay output max current: 3A

Ambient temp:-20 ~ 60

Storage temp :-20 ~ 70

Thermostat:

Our thermostat is 3A type for water heating, has WiFi and No WiFi type. They are applied to temperature control of water heating applicance, especially used in Water Floor Underfloor Heating System, such as water valves and actuators.

WIFI type thermostats can be controlled by mobile phone.

Package List:

HY525-Hub Controller * 1

User Manual * 1

Notice:

1. Due to product upgrades, the HY525 hub controller is only used to connect Normally Closed(NC) electric thermal actuators!

2. This is wired hub controller, the hub and the thermostat and the actuator are all wired. WiFi means that the thermostat can be controlled by the mobile phone through the APP.

Feature:

1. Every Hub controller max control 8pcs slave controller

2. Heating System included thermal actuator, boiler, water pump and mix valve

3. Every output have a corresponding indicator

1. Output indicate:

(1) LED is constant light in the box mean have power output indicate

(2) LED is flashing light in the box mean a status indicate(If fault, then not indicate)

(3) red indicator light indicates 1-8# compartment electric valve opening indication

(4) LED 9, 10 red indicator light indicates boiler and water pump or system total valve opening indication.

Installation:

Before Using:

If you need to debug or check whether the master controller is working normally, you can press and hold the debug button before powering on and then power on. At this time, the time delay is invalid, you can quickly check the functions required for debugging (such as the debugging function after 20 minutes of no operation). Invalid).

The working time required for the delay time can be adjusted by the dial switch, and can be adjusted according to the product indication position scheme.

Notes:

1,Please cut off power before installation, cleaning or replace

2,Please read manual carefully before installation and operation

3,Suggest let the professional worker install

Related Products:

wifi temperature sensor,

wifi temperature monitor,

wifi temperature and humidity sensor,

rv temperature monitor for pets,

temp stick remote wifi temperature & humidity sensor,,

wifi thermometer,

wifi thermometer for home,

wifi humidity sensor,

remote temperature monitoring wifi,

smart temperature sensor