Applies to Sticker for Yamaha MT-03 MT03 Fuel Tank

Quantity: pair (2 pieces)

Material made of elastic material with super strong 3M adhesive.

Color: as shown in the picture.

Applicability: Yamaha MT03

Condition: Brand new aftermarket product, never used or installed.

Installation instructions are not included.

Facility:

1. Clean and dry the tank surface area; 2. Remove the backing paper from the double-sided adhesive tape and place the rubber sticker over it.

If the double-sided adhesive is hard or the backing paper can be removed,

Place it in the sun or gently heat it with a hair dryer to warm and soften it;

3. Let the sticker sit overnight or for a day;

4. Make sure the back of the sticker is clean and use masking tape to remove any dust from the surface.

5. Remove the paper from the other side of the double-sided adhesive tape and press it firmly against the surface of the tank (some air bubbles need to be smoothed out).