Fogless Shower with -Fog Large Hooks for Bathroom Beauty Tools and Shaving

Step 2:Gently tear off the adhesive protective film.
1.Just clean and dry the surface,then put the hook on smooth surface.Easy to clean and re-position without surface damage.
Step 1:Dry the wall with towel.
Step 4:Finished good.
3.Installation steps for Stick Hook,Sunction cup or Multifunctional hooks.
Step 4:Extrude the bubbles with a scraper.
Step 3:Stick on the wall.
4.Please keep out of children and thank you for your .
Step 3:Fit to the right position.
Step 3:The front film is attached to the .
1 x fogless set.
Step 1:Open the tool kit and clean up the .
Step 5:Tear open the NO.2(back) film.
2.Installation steps for -fog and -rain membrane.
There are two membrane in stock,after half year you can replace another one to make the effect better.
Step 1:Clean and dry the smooth surface.
Step 2:Evenly spray water,tear open the NO.1 (front) film.
Step 2: the transparent protective film.
3.For suction cup,it is easy ,just put the suction cup into wall after cleaning drying the surface.
Step 4:Pull down the hook and lock it.
1.Peel off the protective film before using.This is the most important.
2.It can be reused again and again if dried with a hair dryer, after 12 hours,you can use.