Electriduct CableDuct Coated Fiberglass Continuous Duct Rodder with Trolley & Wheels - 1/2" Diameter x 500 Feet Length

Used to push or pull lines or cables through ducts, tubes, conduit and pipes, our duct rodders feature an aluminum cage and stand for lightweight handling in the field. The cage size is determined by the length of the fiberglass rod, and the 1000FT length model has a trolley and wheel for easy transport.

The fiberglass rod is made from extruded fiberglass and high strength resin for flexibility and tensile strength. The exterior layer is covered with high density UV-resistant polyethylene to protect and insulate while sliding on surface.

Material Fiberglass (inner) and high density polyethylene(outer) Density 1.9gr/cm3 Working Temperature -40 to + 80 Minimum Pulling strength -4000 N Tensile Modulus >46.500Mpa Consistency of rod 137 gr/m Flexural Modulus 46.500Mpa Elongation Break 2.5-3% Min. Bending Radius 388m Tensile Strength >15N/mm2 Environmental Stress & Crack Resistance >1000hr