WARNING: California’s Proposition 65
FEATURES
- Truss Head with 6–lobe recess driver provides an aesthetic, low-profile appearance on sidewall metal applications installed into metal girts.
- Self-drilling point penetrates steel thickness up to .210”
- Undercut EPDM rubber washer provides a secure seal even when driven at an angle.
- T-30W driver is designed to fit securely into the 6-lobe recess to prevent bit “cam-out”.
FOR PROPER INSTALLATION, THE USE OF IMPACT DRIVERS ARE NOT RECOMMENDED FOR POWDER COATED OR ANY WET PAINTED FASTENER.
PULLOUT & PULLOVER VALUES ARE DETERMINED IN THE ST FASTENING SYSTEMS ENGINEERING LABORATORY USING STEEL PANELS/FRAMING & WOOD DENSITIES WHOSE STRUCTURAL PROPERTIES ARE FOUND IN PRESENT DAY PRODUCTS.
Purlin Closeup
Purlin Application
The Truss head is 50% lower than a standard HWH & provides a very aesthetic appearance.
Stitch Closeup
Stitch Application
Drill point is designed to penetrate steel quickly with no "point walking".
ST Fastening Eclipse SteelBinder Technical Specifications
HEAD STYLE TRUSS
POINT DIAMETER .180 / .175
MAJOR DIAMETER .215 / .209
MINOR DIAMETER .164 / .157
WASHER FACE DIAMETER .544 T-30 6-LOBE TRUSS
HEAD ACROSS FLATS NOM .312"
ULT. TENSILE STRENGTH 2900 LBS
MIN. TORSIONAL STRENGTH 92 IN-LBS
NOM. SHEAR STRENGTH 1962 LBS
ST Fastening Eclipse SteelBinder Stitch Technical Specifications
HEAD STYLE TRUSS
POINT DIAMETER .156 / .150
MAJOR DIAMETER .246 / .240
MINOR DIAMETER .192 / .185
WASHER FACE DIAMETER .533 / .551 6-LOBE TRUSS
HEAD ACROSS FLATS NOM .312"
ULT. TENSILE STRENGTH 3800 LBS
MIN. TORSIONAL STRENGTH 150 IN-LBS
NOM. SHEAR STRENGTH 2850 LBS
