Medical Electric Plaster Cutter, Electric Plaster Cutting Tool, Electric Plaster Cutter for Removing Plaster Bandages after Orthopedic Fixation Reduction.

Description

Our medical electric plaster cutter can be used for removing plaster bandages after orthopedic fixation and reduction. The equipped dual insulation protection device allows patients to use it with peace of mind. The equipped storage box is convenient for you to store and carry this product. In short, it is your assistant for removing plaster bandages!

Details 

Two Latches: The two latches on the housing keep the housing tightly closed, preventing the housing from opening and damaging the product.

Practical Saw Blades: Three different-shaped saw blades can meet different cutting needs.

Application

It is suitable for removing plaster bandages after orthopedic fixation reduction.

Specification

Material: Metal, Plastic

Color: Green, Black

Style: Modern

Motor Type: Micro Special Motor

Voltage: 110V/60Hz

Input Power: 125W

Blade Shape: Circular, Fan-shaped

Power Source: Corded Electric

Plug Type: US Standard

Swing Range: 5 °

Swing Frequency: ≥ 12500 times/min

Noise: 63dB

Adjustable Speed: 6 Gears

Product Size(L*H): 28*7cm/11.02*2.76in

Storage Box Size: 38*21*12cm/14.96*8.27*4.72in

Package Size: 25*15*40cm/9.84*5.91*15.75in

Gross Weight: 3kg/6.61lbs

Net Weight: 2.85kg/6.28lbs

Package Included

1* Medical Electric Plaster Cutter

1* Wrench

3* Saw Blades

1* Storage Box

1* English Manual

Notes 

1. Please read the instruction manual and labels completely before installation and use, and pay particular attention to the safety instructions included.

2. When there is an abnormal sound or excessive vibration, please repair it in a timely manner.

3. Before use, please check whether the saw blade is deformed, missing teeth, and is installed firmly. When installing the saw blade, make sure that the saw blade shaft is fixed in place, fit the pull head shaft with the flat side, use a saw blade wrench to remove other nuts in front of the saw blade, take out the concave sleeve and saw blade, and then re-tighten the saw blade. Check the ventilation channel of the motor, which must be kept unobstructed to prevent foreign objects from blocking and causing poor ventilation, which can lead to high temperatures during motor operation and even burn out the motor.

4. Please do not apply excessive pressure during use. When the saw blade is stuck in the plaster bandage, cut off the power and slowly exit. Please do not forcefully open it when the power switch is turned off to avoid damaging the motor.

5. The temperature of the motor casing will gradually increase over time. If the casing is found to be overheated, it should be immediately stopped from use and allowed to cool before continuing operation, otherwise, it may cause the motor to overheat and burn out.

6. After use, the product should be wiped clean and stored in a dry environment (with relative humidity below 80% and non-corrosive gas) to prevent moisture damage and malfunction.

7. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.