eXtremeRate Custom DIY Replacement Full Set Housing Shell with Buttons for Steam Deck OLED Handheld Console - Clear Lime Green

Only Compatible with Steam Deck OLED
Read Before Purchase:
Actually, they are full housing shells with buttons for Steam Deck OLED without any electronic parts.
Requires customers to take apart the console to replace the original shells and buttons with eXtremeRate accessories.
Requires customers with high hands-on skills, no soldering is required.
Get the installation video guide on YouTube by searching "eXtremeRate Full Set Shell for Steam Deck OLED". Requires a heat gun or hair dryer to disassemble the screen when installing the faceplate.
Product Feature:
Totally upgrade your handheld console to the exclusive and stylish level.
Made of durable premium ABS and PC plastic, durable and practical.
Completely fits flush on all sides; Sits properly on all the clips.
The removable L4L5 R4R5 buttons design makes it more convenient to replace the back buttons yourself.
Personalize your handheld console, with a variety of colors to choose from.
Precautions before installation：
Please make sure that the battery power is less than 25%, as a charged lithium-ion polymer battery can be dangerous if accidentally punctured.
Please remove the micro SD card before installation to avoid damaging the back cover.
Please note that it will can not restore the original trackpad if you replace the trackpad cover.
It is advisable to distinguish and organize all the removed screws as much as possible to facilitate the later reassembly, as there are a large number of screw types and quantities.
Installation Tips：
Installation difficulty: High
Time spent: 2 hours or more
Patience needed: High
Go slow. Check every connection. Keep your screws and inner parts organized.
Watch the YouTube video guide on how to do it though, pausing and replaying often.
During reassembling the handheld console you must be conscious of how tight you are tightening the screws, and be careful not to strip the screws or over-tighten any screws.
There are multiple very delicate ribbon cables in the device that need to be removed and reattached.
Use tweezers instead of bulky fingers at all times to help with the little pieces that you'll take to move to the new case.
Please do not over heating and too long when heating the screen during disassembly. Also, make sure the distance is no more than 3mm when using the prying tool to tear down the screen to avoid damage.
Package Includes：
1x Backplate; 1x Faceplate
1x Full set buttons
2x Screwdrivers; 1 Set open shell tool
91x Screws;8x Springs
Note: The console and other parts are not included!