Eibach Pro-Spacer wheel spacers S90-4-25-063 2x25mm 5x114,3 compatible with Ford USA EXPLORER MUSTANG Convertible MUSTANG Coupe

Eibach Pro Spacer - Wheel Spacers compatible with Ford USA EXPLORER MUSTANG Convertible MUSTANG Coupe

Width: 2x25mm
PCD: 5x114,3
Centerbore: 70,5mm
System: 4
Offset:
Screw diameter: M14x1,5
Eibach Pro-Spacer wheel spacers System 4 give the look and performance of your vehicle the finishing touch. Your vehicle gets a wider, more stable track - quickly and easily.

Eibach Pro-Spacer is the ideal combination for use with lowering springs, if the original or aftermarket wheels are missing that last optical "kick". With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch. That’s how the car’s look gets its final touch. By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behavior combined with higher stability, as the roll of the chassis is influenced in a positive manner.

Product advantages:

Widen your stance - for better handling and appearance

Made of high-tensile-strength aluminum alloy

Perfect fit due to the smallest manufacturing tolerances, resulting in balanced wheel balance

All applications tested in rigid durability- and fatigue tests

High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021)

Significant weight advantage compared to wheel-spacers made from steel

ABE or parts certificate

Assembly instructions:

Disc with a screw system

With centering collar (centering nose)

Track change from 30 to 60 mm (disc thickness from 20 to 30 mm)

Fastening:
a) disc at wheel carrier: by using special-fixing nut
b) wheel at disc: by using production (or accessory) -nut

with pressed-in knurled studs inkl. short special wheel nuts, TÜV-certificate as download

S9 - ATTENTION - ALSO NOTE ON SERIES WHEELS! - When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is not possible to use the wheels or wheelspacers! Please check as follows: Stud lengh (e.g. 25mm) minus spacer-thickness (e.g.15mm) = 10mm exess length. So the cut out should have 11mm depth to take the original stud. Further the cut out should have minimum 22mmx22mm height/width to take the overlaping nut. It´s allowed to shorten the stud bolt with a saw (Maximal up to the beginning of the nut. - We recommend only to shorten the minimum lengh.) If shorten the stud bolts, first please consider that all wheels used at the car still will fit (e.g. summer- / winterwheels) ATTENTION: when using 15 mm wheelspacers at least 7 mm deep cut-outs are needed (at 20mm wheelspacers at least 2mm deep cut-outs are needed) as the nuts stand over the contact surface! It´s allowed to shorten the stud bolts
S23 - Not permitted for vehicles with steel wheels!