12"x12" Realistic Concrete Texturing Mats, Decorative Concrete Stamps Mats for Imprinting Concrete Courtyard Paths Driveways Sidewalks

Concrete Seamless Stamp Mat

• 12'' x 12''
  
• 18'' x 18''
  
• 36" × 36"
  
• The seamless concrete slate pattern is made of high-quality PU, which is strong and durable. It can imprint the concrete ground quickly and make it look neater with a uniform shape, and it also has a good anti-slip effect. You can use this product directly after receiving it, saving you lots of time.
  

• It is suitable for imprinting concrete.
  

Features

• High-quality Material
  
• Stylish Exterior
  
• Quick Imprinting
  
• Uniform Floor Pattern
  
• Lightweight and Compact
  

• Package Included
  
• 1* Seamless Concrete Slate Pattern
  
• 1* Edge Trimmer
  

Specifications

Color: Blue

Material: PU

Style: Modern

Gross Weight: 6 kg/ 13.33 lbs

Thickness: 1.5 cm/0.59 inch

Product Size: About 30*30 cm/12*12 in

Product Size: About 45*45 cm/18*18 in

Product Size: About 90*90 cm/ 36*36 in

Details

It can trim the edges and corners of concrete to make it more beautiful.

Details

he surface of the product is unevenly patterned, which can provide a good anti-slip effect when printed on a concrete floor.

Details

The handle of the edge trimmer is ergonomic and comfortable to hold

Details

Construction Process of Embossed Floor

1. The formwork construction, paving, vibrating, grouting, and leveling shall be completed according to the construction procedures of pavement concrete.
   
2. Before the initial setting of the concrete surface, use a large magnesium alloy spatula to smooth the concrete surface.
   
3. Use special magnesium alloy edge finishing plaster to finish edges and corners as required.
   
4. Spread the colored reinforcement evenly on the concrete surface two times, the first time spreading 2/3 of the standard amount (3kg/6.6lbs per square meter), and the second time spreading the remaining 1/3.
   
5. Every time the color reinforcement is sprayed, the magnesium alloy trowel shall be used for leveling and polishing after the color reinforcement is wet so that the color reinforcement can completely cover the concrete surface.
   
6. After the initial setting of the color strengthening material, when the surface is dry and there is no obvious moisture, evenly sprinkle the coating powder on the surface, and the standard dosage per square meter is 0.15kg/ 0.33lbs.
   
7. Press the die alternately and progressively. The die shall be formed once to avoid repeated stamping.
   
8. Brush the floor surface evenly three days after the completion of the die. A small amount of detergent can be added during cleaning. Cut the expansion joint in time before cleaning.
   
9. After the floor surface is completely dry, it must be sprayed with color art floor protective agent, the standard dosage is 0.15kg/ 0.33lbs per square meter. The protective agent can spray with a roller brush or spray barrel.