IK Goizper: INOX SST 6 Sprayer

IK INOX /SST 6 The IK INOX 6 professional sprayer is characterized by its great robustness, ease of use and quality of materials. The equipment is equipped with a 1.8 m bi-component hose, a large integrated funnel to facilitate filling, a safety valve set at 6 bar that can be depressurized, a support for the lance, a pressure gauge, a belt for carrying it on a shoulder strap, two spray nozzles (adjustable cone and fan) and a base for greater stability and foot support. The tank of the IK INOX 6 is made of stainless steel and includes a connector for compressed air. Where to use: Building Cleaning and disinfection Industry and maintenance Pest control For use with: Solvent-based pesticides (Optimal) Oils (Optimal) Solvents and petroleum by-products (Optimal) Technical information Valve Tared at 6 bar / 88 psi depreciable Hose 1.8 m / 70,8 inches Standard nozzles Adjustable conical nozzle and fan Lance 50 cm / 19,6 inches stainless steel Useful capacity 6l. - 1,6 U.S. Gals. Total capacity 9l. - 2,4 U.S. Gals. Liters/Min. 3 bar 0,7l/min - 0,18 gal/min Gross weight 4,4 kg - 9,7 lbs. Net weight 4 kg - 8,8 lbs. Cleaning & Maintenance: Depressurize the sprayer and clean it with water after every use. Check the correct operation of the safety valve by triggering the mechanism every now and then and making sure that it releases pressure smoothly. Collect and dispose of the residual amount according to the legislation, prescriptions, and applicable regulations. In the event of obstruction of the nozzle, clean it with water and do not use metallic objects. Clean the tank regularly after each use. Rinse with clean water and, if necessary, use specific detergents to remove stubborn residues. Safety: Removing chemical residues prevents possible unwanted reactions and protects the health of spray operators. If the filter of the handle is clogged, remove it and clean it with water. Store the sprayer under cover, avoiding freezing temperatures and extreme heat (between 5°C and 30°C). To prolong the life of the seals, regularly apply grease to the moving parts of the sprayer. #83373