DC Brush Motor Speed Controller 20A 12V-60V for PWM Regulator for DC Brush Motor Electrical Equipment Accessories,A,1 * DC brush motor speed controller,Black

Name:DC brush motor speed controller
Size:60x100x90mm
Speed regulation mode:pulse width
Pulse width frequency:15KHz
Input voltage:DC12-60V
Modulation output:0-input voltage
Rated current:20A
Output current:Less than 10A
Maximum current:20A
Continuous current:10A
Speed adjustment range:0%-100%
Quiet current:0.01A(standby state)
Speed adjustment:potentiometer
Directions:
1. Turn off the power,connect it according to the wiring diagram and make sure the connection is correct
2. Fix the controller well and set the speed to the lowest"0",so as to avoid sudden large current and permanent damage when starting the power supply
3. Then turn on the power and adjust the speed knob to the desired position.Please turn off the power when not
4. The governor is connected to the motor.If the torque or speed is found to be inconsistent with the requirements,please adjust the fine-tuning potentiometer on the side of the product.
5. To change the running direction of the motor,easily replace the for jumper lines of "CW" on the back of the controller.
6. Select COM and CW short connection,then the motor rotate clockwise.
7. Select COM and short connection,then the motor does counterclockwise rotation.
Model:A:M6020RF(with forward and reverse)
Colour:Black
Material:Metal

Package Contents:
1 * DC brush motor speed controller

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.