Tusk Fender Eliminator Kit without Turn Signals for Tenere 700 2021-2023

The stock rear fender assembly on dual-sport motorcycles can be cumbersome, with an awkwardly low and bulky design. The Tusk Fender Eliminator Kit reduces the bulk by removing the low-hanging assembly and relocating the license plate high, close to the fender. Give your bike a more aggressive appearance over stock, to set it apart from the crowd, by adding a Tusk Fender Eliminator Kit. The license plate is moved up and forward, directly under the taillight by means of a durable powder coated steel bracket. An HDPE plastic license plate backer is included to provide durable support. The turn signal mounts are standard 10 mm round holes integrated in the relocation bracket, and are also moved up, forward, and inward. A compact Tusk LED license plate light is included in the kit. The Tusk Fender Eliminator Bracket for the Yamaha Tenere 700 is the same as the Tusk Fender Eliminator Kit but does NOT include turn signals or a flasher relay, so you can pick your own aftermarket turn signals to mount in the available 10 mm holes. This product is not DOT approved. Check with local laws and regulations for compliance prior to installation and use. Includes: -Black powder coated steel license plate relocation bracket. -Tusk LED license light. -HDPE plastic license backer. -License plate hardware. -1 cable tie. -Printed instructions (*Install video available on RMATV website.) Requires: -Your choice of turn signals that fit 10mm mounting holes. -LED Flasher relay or Resistors if LED turn signals are used.