Wireless Dog Fence, Pet Boundary Containment System for Dogs and Pets with Waterproof Training Collar Receiver, Covers up to 856-Acre, Electric Dog Fence, 3 Training Modes for All Dogs,for3dogs

Product DescriptionProduct name : Wireless Fence for Dogs & Training Collar

- Material:Plastic, Nylon+ABS anti bark collar
- Water-resistance level:IPX7
- Fit Type: 15-120LBS
- Transmitter: 3.7V2500MAH
- Receiver: 3.7V500MAH
- Controllable range: 50-990ft Adjustable
- Operation Mode: Sound + Vibration + Electric Shock(0-9 files adjustable)

How to pair Transmitter with Receiver：

1. Turn on the power switch of receiver and transmitter first;
2. Press the "MODE" key to select the Training MODE;
3. Press the "CH" key to select one of the channels A, B, C and D,and press the "CH" key for a long time at the same time. The greenarrow flashes and releases the hand, and the transmitter enters thecode alignment state;
4. Press the receiver power switch for a long time. After hearing thedrip sound, the gray icon of the receiver changes color, the receiverchanges to flash, and the code is successfully matched;(Note, at the same time, pressing and holding the transmitting andreceiving power on key can also check the code)

Package lncluded:

1 x Wireless fence main unit
1/2/3 x Dog collar receiver
1 x Test light
1 x Charging cable
4 X Metal contact
4 X Safe Silicon Cap
1 x English manual
working principle：
1.When dogs are out of the setting range,the receiver collar will work as below:1.Sound for 5seconds,shock for 5second ,sound&shock for 6seconds,indicatror light flashing.
2.After 2 cycles of woring mode, it will emit di-di-di sound until the dogreturns to the setting range,then the receiver collar will stop